20 in stock

Add to Wishlist
Add to Wishlist


The Signal Injector is an accessory that allows the Signal Generator signal to be safely applied to an electrical system via a conventional 3-pin power socket.
The C.Scope Signal Injector is an accessory which when connected to a C.Scope Signal Generator or Transmitter applies a signal safely to an electrical system via a conventional 3-pin power socket.
This signal will then be detectable on the buried supply cable outside the building and any supply cables within the property.
To transmitted signal can then be detected by a C.Scope Cable Avoidance Tool or Precision Pipe and Cable Locator.

Encapsulated, robust housing
Moisture / dust resistant to IP54

Electrical Output (Mains side)
Electrical Isolation: Class II (Double Insulated)
Mains Plug Connector: UK, 3 pin to BS1363, load between Live and Earth or 2 pin European Shuko style
Maximum Voltage: 250 V rms
Maximum Load: <10mA (predominantly capacitive)
Frequency range: 45-65 Hz

Electrical Input (Signal Generator side)
Connector: 3 pin XLR male (industry standard)
Maximum Voltage: 42 V rms
Maximum Power: <250mW when driven from SGA or SGV
Input Impedance: 2000 Ohms
Frequency: 33 kHz

Input Lead: 1m
Output Lead: 1.5m

Highly efficient transfer of Signal Generator signal to electricity supply cable.

Isolates Signal Generator from electrical supply for safety.

UK or Schuko plug types.

Fully weatherproof design to IP65.

Can be used with all C.Scope Locators, Generators and Transmitters

Additional information

Weight 0.300 kg
Dimensions 100 × 50 × 25 cm